How to Install Goautodial Ce 2 1 Final Isol on Your Server
Goautodial is an open source omni-channel contact center suite that includes predictive dialer, inbound IVR and ACD, and non-voice features. It is based on CentOS Linux and uses Asterisk, Vicidial, and other open source software. If you want to set up your own call center using Goautodial, you need to download and install the Goautodial Ce 2 1 Final Isol image on your server.
In this article, we will show you how to do that step by step. We will also provide you with some tips and troubleshooting advice in case you encounter any problems. By the end of this article, you should be able to run Goautodial on your server and start making and receiving calls.
What You Need
Before you begin, make sure you have the following:
A server with at least 4 GB of RAM, 80 GB of hard disk space, and a dual core processor. You can use a physical or a virtual server, but make sure it has a static IP address and can access the internet.
A CD/DVD drive or a USB flash drive to burn the Goautodial Ce 2 1 Final Isol image. You can download the image from here. The file size is about 1.5 GB. You can also check the MD5 hash of the file to verify its integrity. The MD5 hash is 92fd03143d70ec0c3ad1b885bb1bf952.
A monitor, a keyboard, and a mouse to connect to your server.
A SIP trunk or a VoIP provider account to make and receive calls. You can use any SIP trunk or VoIP provider that supports Asterisk.
How to Install Goautodial Ce 2 1 Final Isol
Once you have everything ready, follow these steps to install Goautodial Ce 2 1 Final Isol on your server:
Burn the Goautodial Ce 2 1 Final Isol image to a CD/DVD or a USB flash drive using any software that can create bootable media.
Insert the CD/DVD or the USB flash drive into your server and boot from it. You may need to change the boot order in your BIOS settings.
When you see the Goautodial boot menu, choose Install or upgrade an existing system. Press Enter.
Follow the on-screen instructions to complete the installation process. You will need to choose your language, keyboard layout, time zone, disk partitioning, root password, and network configuration. You can accept the default options for most of these settings, but make sure you set a strong root password and configure your network correctly.
When the installation is finished, reboot your server and remove the CD/DVD or the USB flash drive.
Login to your server using the root username and password you set during the installation.
You should see a welcome message that shows your server's IP address and some basic information about Goautodial. You can also login to your server via SSH using any SSH client.
To access the Goautodial web interface, open a web browser on any computer that can access your server's IP address. Enter http://your_server_ip/ in the address bar. You should see the Goautodial login page.
The default username and password for the Goautodial web interface are admin and goautodial. Enter them and click Login.
You should see the Goautodial dashboard that shows your system status, campaigns, agents, reports, and settings. You can explore these options and customize them according to your needs.
To configure your SIP trunk or VoIP provider account, go to Settings, then aa16f39245